Heidolph Hei-VAP Precision User Manual download pdf (Page 15)

Set-up and Start-up Set-up and Start-up

28 29

Install the condenser mounting

1 Support rod 4 Vacuum sensor

2 Drive unit 5 Fastening clip for vacuum sensor

3 Fastening screw - support rod

Figure 4-6: Install the condenser mounting

Attach the support rod (1) to the drive unit (2) via a fastening screw (3). Stick the

fastening clip (5) on the support rod (1) and x it with the fastening screw. Put the

vacuum sensor (4) into the fastening clip (5).

CAUTION Unintentionally rotating drive!

Injuries to hands.

Verify that the rotation is displayed.

WARNING Risk of injuries due to retracting or entrapment!

Risk of injury.

A risk of entanglement exists on the movable parts of the unit.

Wear suitable protective clothing for activities on the rotary

evaporator with goggles and gloves.

Install the vapor tube

The evaporator ask and the vapor tube are connected with the condenser and the

rotation of the evaporator ask is made possible by the drive unit.

WARNING Glass breakage!

Serious injuries from shattering and breaking glass.

Check glass devices for damages (stars, breaks, etc.).

Only use perfect glass devices and replace all damaged glassware

as soon as possible.

Work carefully.

CAUTION Unintentionally rotating drive!

Injuries to hands.

Verify that the rotation is displayed.

WARNING Risk of injuries due to retracting or entrapment!

Risk of injury.

A risk of entanglement exists on the movable parts of the unit.

Wear suitable protective clothing for activities on the rotary

evaporator with goggles and gloves.

1. Remove the vapor tube from the packaging.

In order to protect the glassware sets with vertical condensers (G3 - G6) from

accidentally tilting, they are supported by a condenser mounting and support rod.

Moreover, the support rod shall be used to xate the vacuum sensor to all glassware sets.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

No comments

Heidolph Hei-VAP Precision User Manual Page 15